Skip to content

Latest commit

 

History

History
183 lines (130 loc) · 6.7 KB

nodejs-setup.md

File metadata and controls

183 lines (130 loc) · 6.7 KB

Installing Node.JS

Node.JS is Javascript Runtime Environment for running JavaScript files directly on a computer. JavaScript is built into every web browser, but if we want to run JavaScript directly without a browser, we need to install Node.JS.

NOTE: We do not install Node.JS using the installer provided at the Node.JS website in this class. If you have this one installed, please uninstall it before proceeding with these instructions.

Node Version Manager (nvm)

Often as developers we will need to juggle multiple projects on our computers, each running a different version of Node.JS. Because of this just installing a new version from the Node.JS website would be difficult and error prone.

Luckily there's a piece of open source software that can help called Node Version Manager or nvm.

To install nvm check out the nvm github page here:

nvm Github Page

Below the code, there is a README section. Usually when installing software from github you'll want to check the README for instructions. If you scroll down you'll see instructions for how to install nvm. In this case we can run a special command with curl to download and install nvm from the terminal.

So open a Terminal and use the curl command listed in the README. It should look something like this, although the version number in the URL might vary:

curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.37.2/install.sh | bash

When you do this you'll see something like this:

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 13527  100 13527    0     0  49731      0 --:--:-- --:--:-- --:--:-- 49915
=> Downloading nvm from git to '/home/your-user/.nvm'
=> Cloning into '/home/your-user/.nvm'...
remote: Enumerating objects: 333, done.
remote: Counting objects: 100% (333/333), done.
remote: Compressing objects: 100% (283/283), done.
remote: Total 333 (delta 38), reused 150 (delta 25), pack-reused 0
Receiving objects: 100% (333/333), 177.16 KiB | 1.46 MiB/s, done.
Resolving deltas: 100% (38/38), done.
=> Compressing and cleaning up git repository

=> Appending nvm source string to /home/your-user/.bashrc
=> Appending bash_completion source string to /home/your-user/.bashrc
=> Close and reopen your terminal to start using nvm or run the following to use it now:

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

The lines to pay attention to are the last three. These are the shell commands necessary to initialize nvm. But we don't want to have to run these commands everytime we open a terminal, so we should put these into our shell startup file

The general rule on this is:

If your shell is zsh use ~/.zshrc If your shell is bash use ~/.bashrc

You can determine which shell you have by typing echo $SHELL at the command line

You'll notice in my case the nvm installer automatically added the lines to my ~/.bashrc even though I run zsh. You should verify that the lines were correctly added to your startup file. Don't trust the installer to always do the right thing in this case. Everyone's system is different.

To verify it, open up your startup file in vscode with the code command. (use the appropriate startup filename depending on which shell you have)

code ~/.zshrc

If you do not see the nvm startup lines in your file already, add them in there.

There are two ways to run your startup file. You can run it live in your current shell by typing the source command and following it with your startup file, or an even easier option is to just close your terminal window and open it back up.

Once you have done these steps, run nvm by itself at the command prompt. You should see the help messages from nvm. If this doesn't work, double check your shell startup files.

Installing Node.JS

Now that we have nvm installed and ready to go, we can use it to install a particular version of Node.JS.

Currently in this course, we use version 12 of Node.JS. Version 14 is out but not all of the curriculum has been tested to work on Node.JS 14.

Note only stick to LTS versions of Node.JS. This stands for Long Term Support. These are the stable versions of Node.JS. The Odd numbered releases such as 15 are experimental releases and should not be used for anything important. They are a way for people to test new releases of Node.JS, not something you should rely on for your code.

So let's install it!

nvm install 12

You should see something like this:

Downloading and installing node v12.20.0...
Downloading https://nodejs.org/dist/v12.20.0/node-v12.20.0-linux-x64.tar.xz...
################################################################################################################################################################################################### 100.0%
Computing checksum with sha256sum
Checksums matched!
Now using node v12.20.0 (npm v6.14.8)
Creating default alias: default -> 12 (-> v12.20.0)

You'll notice we can just provide 12 here and not any specific version of Node.JS like 12.20.0. nvm is good like that, it will automatically install the latest version of 12.

Once this is complete, you should be able to type

node --version

and it should print out the correct version of Node.JS.

You can verify that the Node.JS you installed is coming from your nvm setup, by using this shell command:

which node

If it prints out a path with .nvm in it, then you've done it correctly!

/home/<<your username>>/.nvm/versions/node/v12.20.0/bin/node

Congratulations you've just installed Node.JS!

Mocha - One last step

We use a tool called Mocha for testing our Javascript code. We need to install this. We will use it to test in our projects and also when you do assessments.

To install it we use the npm command.

NOTE: DO NOT confuse npm with nvm. They are different tools. nvm controls the version of Node.JS you have installed, while npm is responsible for installing Node Packages which are third party pieces of software written in JavaScript.

To install mocha do this:

npm install -g mocha

the -g is called a flag. This changes the behavior of the install command.

In this case it means global. By default npm will install files into your project directory, but we want mocha to be installed for all projects, so we specify -g.

You can verify mocha works by typing

mocha --version

If it prints out a version number, pay yourself on the back, you have successfully installed Node.JS and Mocha!