compile_prerelease.yml

name: Compile Prerelease

on:
  workflow_dispatch:

jobs:
  build:
    name: Build for ${{ matrix.target.name }}
    runs-on: ubuntu-latest

    strategy:
      matrix:
        target:
          - { name: "esp32-generic", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.default.esp32", zip_name: "esp32-generic.zip" }
          - { name: "esp32s2-generic", idf_target: "esp32s2", sdkconfig_file: "configs/sdkconfig.default.esp32s2", zip_name: "esp32s2-generic.zip"}
          - { name: "esp32s3-generic", idf_target: "esp32s3", sdkconfig_file: "configs/sdkconfig.default.esp32s3", zip_name: "esp32s3-generic.zip" }
          - { name: "esp32c3-generic", idf_target: "esp32c3", sdkconfig_file: "configs/sdkconfig.default.esp32c3", zip_name: "esp32c3-generic.zip" }
          - { name: "esp32c6-generic", idf_target: "esp32c6", sdkconfig_file: "configs/sdkconfig.default.esp32c6", zip_name: "esp32c6-generic.zip" }
          - { name: "Awok V5", idf_target: "esp32s2", sdkconfig_file: "configs/sdkconfig.default.esp32s2", zip_name: "esp32v5_awok.zip"}

          # Dev Kit configurations (LED on, no screen support)
          - { name: "esp32c3-devkit", idf_target: "esp32c3", sdkconfig_file: "configs/sdkconfig.devkit.esp32c3", zip_name: "esp32c3-devkit.zip"}
          - { name: "esp32c6-devkit", idf_target: "esp32c6", sdkconfig_file: "configs/sdkconfig.devkit.esp32c6", zip_name: "esp32c6-devkit.zip"}

          # Ghost board (LED on, special pin and LED count)
          - { name: "ghostboard", idf_target: "esp32c6", sdkconfig_file: "configs/sdkconfig.ghostboard", zip_name: "ghostboard.zip"}

          # Screen-supported builds
          - { name: "MarauderV4_FlipperHub", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.marauderv4", zip_name: "MarauderV4_FlipperHub.zip"}
          - { name: "MarauderV6&AwokDual", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.marauderv6", zip_name: "MarauderV6_AwokDual.zip"}
          - { name: "AwokMini", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.awokmini", zip_name: "AwokMini.zip"}
          - { name: "ESP32-S3-Cardputer", idf_target: "esp32s3", sdkconfig_file: "configs/sdkconfig.cardputer", zip_name: "ESP32-S3-Cardputer.zip"}
          - { name: "LillyGoTWatch_S3", idf_target: "esp32s3", sdkconfig_file: "configs/sdkconfig.S3TWatch", zip_name: "lillygos3watch.zip"}


          # CYD (Cheap Yellow Display) with touch screen
          - { name: "CYD2USB", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.CYD2USB", zip_name: "CYD2USB.zip"}
          - { name: "CYDMicroUSB", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.CYDMicroUSB", zip_name: "CYDMicroUSB.zip"}
          - { name: "CYDDualUSB", idf_target: "esp32",  sdkconfig_file: "configs/sdkconfig.CYDDualUSB", zip_name: "CYDDualUSB.zip"}
          - { name: "CYD2USB2.4_Inch", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.CYD2USB2.4Inch", zip_name: "CYD2USB2.4Inch.zip"}


          # 7-inch boards
          - { name: "Waveshare_LCD", idf_target: "esp32s3", sdkconfig_file: "configs/sdkconfig.waveshare7inch", zip_name: "Waveshare_LCD.zip"}
          - { name: "Crowtech_LCD", idf_target: "esp32s3",  sdkconfig_file: "configs/sdkconfig.crowtech7inch", zip_name: "Crowtech_LCD.zip"}

    steps:
      - name: Checkout Repository
        uses: actions/checkout@v3

      - name: Set up Python
        uses: actions/setup-python@v4
        with:
          python-version: '3.9'

      - name: Install ESP-IDF
        run: |
          sudo apt-get update
          sudo apt-get install -y wget git flex bison gperf python3-pip python3-setuptools cmake ninja-build ccache libffi-dev libssl-dev dfu-util
          git clone -b v5.3.1 --depth 1 https://github.com/espressif/esp-idf.git ~/esp-idf
          ~/esp-idf/install.sh

      - name: Apply Custom SDK Config
        run: |
          cp "${{ matrix.target.sdkconfig_file }}" sdkconfig.defaults

      - name: Set up ESP-IDF and Target
        run: |
          . ~/esp-idf/export.sh
          export IDF_TARGET=${{ matrix.target.idf_target }}
          echo "IDF_TARGET=${{ matrix.target.idf_target }}" >> $GITHUB_ENV

      - name: Clean and Build Project
        env:
          SDKCONFIG_DEFAULTS: "sdkconfig.defaults"
        run: |
          . ~/esp-idf/export.sh
          idf.py clean
          idf.py build

      - name: Download Bootloader
        run: |
          BOOTLOADER_URL="https://cdn.spookytools.com/bootloaders/${{ matrix.target.idf_target }}.bin"
          BOOTLOADER_PATH="build/bootloader.bin"
          echo "Downloading bootloader from $BOOTLOADER_URL..."
          curl -L -o "$BOOTLOADER_PATH" "$BOOTLOADER_URL"
          if [ ! -f "$BOOTLOADER_PATH" ]; then
            echo "Error: Bootloader could not be downloaded."
            exit 1
          else
            echo "Bootloader downloaded successfully."
          fi

      - name: Package Artifacts into ZIP
        run: |
          ARTIFACT_DIR="packaged_artifacts"
          ZIP_FILE="${{ matrix.target.zip_name }}"
          mkdir -p "$ARTIFACT_DIR"
          cp build/partition_table/partition-table.bin "$ARTIFACT_DIR/"
          cp build/*.bin "$ARTIFACT_DIR/"
          echo "Packaging into zip: $ZIP_FILE"
          cd "$ARTIFACT_DIR"
          zip "../$ZIP_FILE" ./*
          cd ..
          echo "Zip file $ZIP_FILE created."
          ls -lh "$ZIP_FILE"

      - name: Upload Build Artifacts to GitHub
        uses: actions/upload-artifact@v3
        with:
          name: ${{ matrix.target.zip_name }}
          path: ${{ matrix.target.zip_name }}

  upload_all:
    name: Upload All to Cloudflare R2 and GitHub Release
    needs: build
    runs-on: ubuntu-latest

    steps:
      - name: Download All Artifacts
        uses: actions/download-artifact@v3
        with:
          path: all_artifacts

      - name: Verify and Flatten Artifacts
        run: |
          echo "Checking and flattening artifacts..."
          mkdir -p flat_artifacts
          if [ -d "all_artifacts" ] && [ "$(ls -A all_artifacts)" ]; then
            find all_artifacts -type f -exec cp {} flat_artifacts/ \;
            echo "Flattened artifacts:"
            ls -lh flat_artifacts
          else
            echo "No artifacts found or directory is empty."
            exit 1
          fi

      - name: Install rclone
        run: |
          curl -fsSL https://rclone.org/install.sh | sudo bash

      - name: Configure rclone for Cloudflare R2
        env:
          R2_ACCESS_KEY: ${{ secrets.R2_ACCESS_KEY }}
          R2_SECRET_KEY: ${{ secrets.R2_SECRET_KEY }}
        run: |
          mkdir -p ~/.config/rclone
          cat <<EOF > ~/.config/rclone/rclone.conf
          [cloudflare_r2]
          type = s3
          provider = Cloudflare
          access_key_id = $R2_ACCESS_KEY
          secret_access_key = $R2_SECRET_KEY
          endpoint = https://fb5f7d31bedfe4f3538ddfa6db491962.r2.cloudflarestorage.com
          EOF

      - name: Upload All Artifacts to Cloudflare R2
        env:
          R2_BUCKET: "spooksapi"
          R2_PATH: "GhostESPBins"
        run: |
          echo "Uploading artifacts to Cloudflare R2..."
          for file in flat_artifacts/*; do
            if [ -f "$file" ]; then
              echo "Uploading $file..."
              rclone copy "$file" "cloudflare_r2:${R2_BUCKET}/${R2_PATH}" --progress --s3-no-check-bucket
            else
              echo "Skipping $file as it is not a valid file."
            fi
          done
          echo "All artifacts uploaded successfully."

      - name: Get the Latest Release ID (Including Pre-releases)
        id: get_release
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          latest_release=$(curl -s \
            -H "Authorization: token $GITHUB_TOKEN" \
            -H "Accept: application/vnd.github.v3+json" \
            "https://api.github.com/repos/${{ github.repository }}/releases" | jq '[.[] | select(.draft == false)] | .[0]')
          release_id=$(echo "$latest_release" | jq -r '.id')
          echo "Latest release ID (including pre-releases) is $release_id"
          echo "::set-output name=release_id::$release_id"

      - name: Upload Artifacts to Latest Release
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          for file in flat_artifacts/*; do
            if [ -f "$file" ] && [ -s "$file" ]; then
              echo "Uploading $file to GitHub Release..."
              curl -X POST \
                -H "Authorization: token $GITHUB_TOKEN" \
                -H "Content-Type: application/zip" \
                --data-binary @"$file" \
                "https://uploads.github.com/repos/${{ github.repository }}/releases/${{ steps.get_release.outputs.release_id }}/assets?name=$(basename $file)"
            else
              echo "Skipping $file as it is either empty or not a valid file."
            fi
          done

      - name: Notify Discord of Successful Upload
        if: success()
        env:
          DISCORD_WEBHOOK_URL: ${{ secrets.DISCORD_WEBHOOK_URL }}
        run: |
          payload=$(cat <<EOF
          {
            "embeds": [
              {
                "title": "🎉 New Build Artifacts Uploaded!",
                "description": "All build artifacts have been successfully uploaded to Cloudflare R2 and GitHub Release.",
                "color": 5814783,
                "timestamp": "$(date -u +"%Y-%m-%dT%H:%M:%SZ")"
              }
            ]
          }
          EOF
          )
          curl -X POST \
            -H "Content-Type: application/json" \
            -d "$payload" \
            "$DISCORD_WEBHOOK_URL"