esp32-usb-meter-example.yaml

substitutions:
  name: atorch-usb-meter
  external_components_source: github://syssi/esphome-atorch-dl24@main
  dl24_mac_address: !secret dl24_mac_address
  project_version: 1.3.0
  device_description: "Monitor and control a Atorch meter via bluetooth"

esphome:
  name: ${name}
  comment: ${device_description}
  project:
    name: "syssi.esphome-atorch-dl24"
    version: ${project_version}

esp32:
  board: wemos_d1_mini32
  framework:
    type: esp-idf

external_components:
  - source: ${external_components_source}
    refresh: 0s

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

ota:
logger:

mqtt:
  broker: !secret mqtt_host
  username: !secret mqtt_username
  password: !secret mqtt_password
  id: mqtt_client

esp32_ble_tracker:

ble_client:
  - mac_address: ${dl24_mac_address}
    id: ble_client0

atorch_dl24:
  - id: atorch0
    ble_client_id: ble_client0
    check_crc: true
    # The meter publishes a status report per second via BLE notification. If you don't like this update interval
    # you can use this setting to throttle the sensor updates by skipping some status reports.
    throttle: 0s

binary_sensor:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    running:
      name: "${name} running"

sensor:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    voltage:
      name: "${name} voltage"
    current:
      name: "${name} current"
    power:
      name: "${name} power"
    capacity:
      name: "${name} capacity"
    energy:
      name: "${name} energy"
    temperature:
      name: "${name} temperature"
    dim_backlight:
      name: "${name} dim backlight"
    running:
      name: "${name} running"
    usb_data_minus:
      name: "${name} usb data minus"
    usb_data_plus:
      name: "${name} usb data plus"
    runtime:
      name: "${name} runtime"

text_sensor:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    runtime_formatted:
      name: "${name} runtime formatted"

# If you use `mqtt` you can control a button if you publish the message "PRESS". The topic depends on
# the name of your ESPHome node and the name of the button entity:
#
# mosquitto_pub -t 'atorch-usb-meter/button/atorch-usb-meter_reset_energy/command' -m 'PRESS'
# mosquitto_pub -t 'atorch-usb-meter/button/atorch-usb-meter_reset_capacity/command' -m 'PRESS'
# mosquitto_pub -t 'atorch-usb-meter/button/atorch-usb-meter_reset_runtime/command' -m 'PRESS'
# mosquitto_pub -t 'atorch-usb-meter/button/atorch-usb-meter_reset_all/command' -m 'PRESS'
# ...
button:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    reset_energy:
      name: "${name} reset energy"
    reset_capacity:
      name: "${name} reset capacity"
    reset_runtime:
      name: "${name} reset runtime"
    reset_all:
      name: "${name} reset all"
    setup:
      name: "${name} setup"
    enter:
      name: "${name} enter"
    usb_plus:
      name: "${name} plus"
    usb_minus:
      name: "${name} minus"