infinite search not solved

[YP1X]

The motherboard on my PC doesn't have bluetooth module, so I am using a USB Bluetooth adapter which bluetooth version is 4.0.
Airpods gen 2 can be well used on WIN10 without drivers, but still has infinite search problem. Due to this, ear detection and all other features can not be used to control airpods.
Its latest drivers was released 10 years ago and can't connect both of the airpods properly.
So, should I use a new USB Bluetooth adapter that is 5.0 version or higher? Can that be solved by this?
And what any other imformations should I supply?
Looking forward to your reply.

[steam3d]

Hi. You can try to find Bluetooth driver from the manufacturing site. The most problems resolve updating driver. You can also upload the log files from MagicPods.

[YP1X]

Hi. You can try to find Bluetooth driver from the manufacturing site. The most problems resolve updating driver. You can also upload the log files from MagicPods.
MagicPodsServiceLog.txt
MagicPodsUILog.txt

[steam3d]

Looks like something is wrong with Bluetooth. Try to update Bluetooth driver

[YP1X]

Looks like something is wrong with Bluetooth. Try to update Bluetooth driver

I did. Still doesn't work. And all 3 solutions have been tried in order.
MagicPodsServiceLog.txt
MagicPodsUILog.txt

windows version: 10 pro 21H2
bluetooth manufacturer: UGREEN
bluetooth adaptor: CM390
bluetooth chips: RTL8761BUV
Bluetooth protocol: A2DP/HSP/AVRCP/HID/PAN/GAVDP/DID/IOPT

[steam3d]

I see that Bluetooth does not loop on connect and disconnect status it is good. But the MagicPods still do not receive Bluetooth low energy data.

Try to run DeviceFinder, open AirPods case and wait 15 seconds. After it upload the log.txt here. This debug app uses the same method to get data from AirPods. If it will work, then something blocks the MagicPods.

Download DeviceFinder here:
#21

[YP1X]

I see that Bluetooth does not loop on connect and disconnect status it is good. But the MagicPods still do not receive Bluetooth low energy data.

Try to run DeviceFinder, open AirPods case and wait 15 seconds. After it upload the log.txt here. This debug app uses the same method to get data from AirPods. If it will work, then something blocks the MagicPods.

Download DeviceFinder here: #21
log.txt

[steam3d]

I figured out the issue. Your AirPods send different data from expected. Some users had similar issie, but they had the fake AirPods. The MagicPods will not work, because it skips unexpected data.

Do you have original AriPods 2? Which version firmware it has? Do you ever use your AirPods with iPhone?

[YP1X]

Yes, it is fake airpods 2.
Firmware version is 3A283.
It works fine with my iphone se 2(original), and doesn't differ from original airpods.
Can you make it work with magicpods?

[steam3d]

I think it is impossible now. I must buy it at research how it works etc.