So hard to find the MAC address #238
-
I have 6 different JK BMS's and I cant find the MAC addresses. I have a couple of the bms hooked up and working good, but I just stumbled across the mac addresses previously and I have no idea how to recreate the steps I took. I have the BMS on and next to my home assistant box but I dont know what to try next. I have pulled the logs from the Home Assistant Bluetooth integration, I have watched all the logs from esphome from the esp32 node. Where can go to find the MAC of these new BMS's? (I have JK_BD4A8S4P, JK_B2A20S20P, and JK_B6A20S15P) |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 3 replies
-
You could use an Android device using the App "nRF Connect" to get an idea about the MAC addresses of your devices. If your ESP32 is unable to report any discovered bluetooth devices it's possible the BLE stack of you ESP32 is faulty. Please try to replace the ESP32 in this case. |
Beta Was this translation helpful? Give feedback.
You could use an Android device using the App "nRF Connect" to get an idea about the MAC addresses of your devices. If your ESP32 is unable to report any discovered bluetooth devices it's possible the BLE stack of you ESP32 is faulty. Please try to replace the ESP32 in this case.