- TI CC2652P SimpleLink™ 2.4 GHz Multiprotocol Wireless MCU targeting Zigbee,Bluetooth 5.1 Low Energy,Thread + 19.5-dBm high-power amplifier
- Support RF-BM-2652P1 and RF-BM-2652P2 Module from RF-STAR,with CC2652P on board
- BSL,RST Buttons
- 2 LED for indication
- Compatible with Z2M
- SMA antenna port for an external antenna
- Self-programming via the cc2538-bsl.No external programmer needed! Push BSL button to trigger this mode.
- Communicates via the common CH340E/CH340C USB-UART Bridge
Boards fits in v.3 Stick Case designed by Jager
There are 2 versions of stick:
- CH340E version, more compact,all elements on one side.
- CH340C version, more easy to solder and includes ESD protection.
Both versions use the same 3D Model Case
EasyEDA Generated Boom,you can order on LCSC directly - BOOM
| Designator | Name | Footprint | Quantity |
|---|---|---|---|
| U1 | RF-BM-2652P1/P2 | 1 | |
| U2 | AMS1117-3.3 | SOT-223 | 1 |
| U3 | CH340E/CH340C | MSOP-10/SOP-16 | 1 |
| R1 | 10 kohm | SMD 0805 | 1 |
| R2,R3 | 1 kohm | SMD 0805 | 2 |
| R4 | 100 ohm | SMD 0805 | 1 |
| C1 | 10uF | SMD_L3.2-W1.6 | 1 |
| C2,C4 | 100nF | SMD 0805 | 2 |
| C3 | 22uF | SMD_L3.2-W1.6 | 1 |
| L1,L2 | RED/GREEN LED | SMD 0805 | 2 |
| SBL,RST | PUSH BUTTON | SMD_L3.9-W3.0-P4.45 | 2 |
| USB | USB A MALE | USB-A-SMD_USB-A-1-TH | 1 |
| JTAG | PIN HEADER 5 PIN | 2.54x5P | 1 |
| ANT | SMA ANTENNA PORT 1.6mm | 1 | |
| D1 | ESD USBLC6-2SC6 | SOT-23-6 | 1 |
WARNING D1 is used only for CH340C version stick.
Next items are not available on LCSC,you can get them on Aliexpress:
Module is compatible with Z2M. Firmware CC1352P2_CC2652P.
Defuault TX Power is 20dbm. It can be lowered in zigbee2mqtt config section:
experimental:
transmit_power: 5
Available TX power values: -20,-18,-15,-12,-10,-9,-6,-5,-3,0,1..5,14..20
- @Jager, @Palco, @Egony, @electrolama for design review and comments
- Name Credit goes to nurikk, before board had a very boring name. Many thanks to him for a lot of work on Z2M and DIY Devices.
For general enquiries, suggestions and errors spotted: Email me at [email protected] or write me directly in Telegram. Community contributions to this page are very much encouraged so you could also send pull requests with your proposed changes.
We use aliexpress affiliate links for the components and the tools. Some Ad-blockers might block these links an thus they seem to appear broken. You will have to temporarely disable ad-blocker to open these links.
zigbee-stick-v4 is designed by DarthPCB's / Grecu Radu and licensed under the GPL-3.0 License.