This is a library for the 0.96" 16-bit Color OLED with SSD1331 driver chip
Pick one up today in the adafruit shop! http://www.adafruit.com/products/684
These displays use SPI to communicate, 4 or 5 pins are required to
interface
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Written by Limor Fried/Ladyada for Adafruit Industries.
BSD license, check license.txt for more information
All text above must be included in any redistribution
I did a evil hack to run the popular SSD1331 RGB oLED Display on hardware SPI with a feather M0. I compare the Adafruit SSD1306 Lib (monochrom) with the Adafruit SSD1331 Lib and modified it a bit.
Some strange I2C and spark stuff is removed. Sorry.
Boards:
- Feather M0
- Arduino Zero
I hope, that Adafruit merge that Idea/code and make it better (using a wrapper design pattern, maybe?).
- Data (or DIN) to MOSI
- SCK/Clk (or Clock) to SCK
- RES (or Reset) to D6
- DC (or D/C or Data-Command) to D5
- CS (or chip select or ID) to 12
- VCC to 3V
- GND to GND
- the normal test example
- a clock and powerbar example
Yes. It works! I am so happy about that. But it is a ugly version.
