Update Protocols_Details.md

pascallanger · Feb 12, 2025 · b2dec9b · b2dec9b
1 parent 565aaed
commit b2dec9b
Showing 1 changed file with 3 additions and 15 deletions.
diff --git a/Protocols_Details.md b/Protocols_Details.md
@@ -1520,9 +1520,6 @@ Models: WLtoys cars 284131/284161/284010/124016/124017/144010 and Eachine EAT14
 
 You must assign a different RX number for each receiver/plane. Otherwise the new receiver/plane ID will overwrite the previous one.
 
-### Sub_protocol X4 - *0*
-Transmitter: XK X4-A160, X5S, model: XK A160S, XK A280, XK A300
-
 If a CC2500 is installed it will be used for this sub protocol. Option in this case is used for fine frequency tuning like any CC2500 protocols so check the [Frequency Tuning page](/docs/Frequency_Tuning.md).
 
 If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components.
@@ -1535,21 +1532,12 @@ The plane does not need to be bound each time if it is powered on **after** the
 
 The rudder trim is driven from the rudder channel to increase the range (Original TX rudder has no range once the motor has been turned on...).
 
+### Sub_protocol X4 - *0*
+Transmitter: XK X4-A160, X5S, model: XK A160S, XK A280, XK A300
+
 ### Sub_protocol P10 - *1*
 Model: Park10 J3-CUB
 
-If a CC2500 is installed it will be used for this sub protocol. Option in this case is used for fine frequency tuning like any CC2500 protocols so check the [Frequency Tuning page](/docs/Frequency_Tuning.md).
-
-If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components.
-
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8
----|---|---|---|---|---|---|---
-A|E|T|R|Rate|Mode|Hover|Light
-
-The plane does not need to be bound each time if it is powered on **after** the radio/protocol is on.
-
-The rudder trim is driven from the rudder channel to increase the range (Original TX rudder has no range once the motor has been turned on...).
-
 ***
 # NRF24L01 RF Module