uefi-raw: Add ScsiIoProtocol

uefi-raw/CHANGELOG.md

@@ -1,13 +1,14 @@
 # uefi-raw - [Unreleased]
 
-## Changed
+## Added
 
 - Added `protocol::string::UnicodeCollationProtocol`.
 - Added `protocol::tcg` module, containing the TCG v1 and v2 protocols.
 - Added `DriverBindingProtocol`.
 - Added `FirmwareVolume2Protocol`.
 - Added `FirmwareVolumeBlock2Protocol`.
 - Added `HiiDatabaseProtocol`.
+- Added `ScsiIoProtocol`.
 
 
 # uefi-raw - 0.9.0 (2024-10-23)

uefi-raw/src/protocol/mod.rs

@@ -18,6 +18,7 @@ pub mod memory_protection;
 pub mod misc;
 pub mod network;
 pub mod rng;
+pub mod scsi;
 pub mod shell_params;
 pub mod string;
 pub mod tcg;

uefi-raw/src/protocol/scsi.rs

@@ -0,0 +1,111 @@
+use crate::{guid, Event, Guid, Status};
+use core::ffi::c_void;
+
+newtype_enum! {
+    /// Corresponds to the `EFI_SCSI_IO_TYPE_*` defines.
+    #[derive(Default)]
+    pub enum ScsiIoType: u8  => {
+        DISK = 0x00,
+        TAPE = 0x01,
+        PRINTER = 0x02,
+        PROCESSOR = 0x03,
+        WRITE_ONCE_READ_MULTIPLE = 0x04,
+        CDROM = 0x05,
+        SCANNER = 0x06,
+        OPTICAL = 0x07,
+        MEDIUM_CHANGER = 0x08,
+        COMMUNICATION = 0x09,
+        RAID = 0x0c,
+        ENCLOSURE_SERVICES = 0x0d,
+        REDUCED_BLOCK_COMMANDS = 0x0e,
+        OPTICAL_CARD_READER_WRITER = 0x0f,
+        BRIDGE_CONTROLLER = 0x10,
+        OBJECT_BASED_STORAGE = 0x11,
+        RESERVED_LOW = 0x12,
+        RESERVED_HIGH = 0x1e,
+        UNKNOWN = 0x1f,
+    }
+}
+
+newtype_enum! {
+    /// Corresponds to the `EFI_SCSI_IO_DATA_DIRECTION_*` defines.
+    #[derive(Default)]
+    pub enum ScsiIoDataDirection: u8 => {
+        READ = 0,
+        WRITE = 1,
+        BIDIRECTIONAL = 2,
+    }
+}
+
+newtype_enum! {
+    /// Corresponds to the `EFI_SCSI_IO_STATUS_HOST_ADAPTER_*` defines.
+    #[derive(Default)]
+    pub enum ScsiIoHostAdapterStatus: u8 => {
+       OK = 0x00,
+       TIMEOUT_COMMAND = 0x09,
+       TIMEOUT = 0x0b,
+       MESSAGE_REJECT = 0x0d,
+       BUS_RESET = 0x0e,
+       PARITY_ERROR = 0x0f,
+       REQUEST_SENSE_FAILED = 0x10,
+       SELECTION_TIMEOUT = 0x11,
+       DATA_OVERRUN_UNDERRUN = 0x12,
+       BUS_FREE = 0x13,
+       PHASE_ERROR = 0x14,
+       OTHER = 0x7f,
+    }
+}
+
+newtype_enum! {
+    /// Corresponds to the `EFI_SCSI_IO_STATUS_TARGET_*` defines.
+    #[derive(Default)]
+    pub enum ScsiIoTargetStatus: u8 => {
+        GOOD = 0x00,
+        CHECK_CONDITION = 0x02,
+        CONDITION_MET = 0x04,
+        BUSY = 0x08,
+        INTERMEDIATE = 0x10,
+        INTERMEDIATE_CONDITION_MET = 0x14,
+        RESERVATION_CONFLICT = 0x18,
+        COMMAND_TERMINATED = 0x22,
+        QUEUE_FULL = 0x28,
+    }
+}
+
+#[derive(Debug, Copy, Clone)]
+#[repr(C)]
+pub struct ScsiIoScsiRequestPacket {
+    pub timeout: u64,
+    pub in_data_buffer: *mut c_void,
+    pub out_data_buffer: *mut c_void,
+    pub sense_data: *mut c_void,
+    pub cdb: *mut c_void,
+    pub in_transfer_length: u32,
+    pub out_transfer_length: u32,
+    pub cdb_length: u8,
+    pub data_direction: ScsiIoDataDirection,
+    pub host_adapter_status: ScsiIoHostAdapterStatus,
+    pub target_status: ScsiIoTargetStatus,
+    pub sense_data_length: u8,
+}
+
+#[derive(Debug)]
+#[repr(C)]
+pub struct ScsiIoProtocol {
+    pub get_device_type:
+        unsafe extern "efiapi" fn(this: *const Self, device_type: *mut ScsiIoType) -> Status,
+    pub get_device_location:
+        unsafe extern "efiapi" fn(this: *const Self, target: *mut *mut u8, lun: *mut u64) -> Status,
+    pub reset_bus: unsafe extern "efiapi" fn(this: *mut Self) -> Status,
+    pub reset_device: unsafe extern "efiapi" fn(this: *mut Self) -> Status,
+    pub execute_scsi_command: unsafe extern "efiapi" fn(
+        this: *const Self,
+        packet: *mut ScsiIoScsiRequestPacket,
+        event: Event,
+    ) -> Status,
+    pub io_align: u32,
+}
+
+impl ScsiIoProtocol {
+    pub const GUID: Guid = guid!("932f47e6-2362-4002-803e-3cd54b138f85");
+}